ZENESIS™ BLACK 4
ZENESIS™ BLACK 4
bridge saw blades
    ZENESIS™ BLADE
  • ZENESIS™ patterned technology delivers consistency in diamond exposure, providing maximum efficiency start to finish. With feed rates exceeding 15 ft/min this blade outperforms random diamond bridge saw blades by
    30 – 70%. This further increases cutting speed and debris/swarf removal. Diamond clusters provide more diamond point exposure, which increases cutting speed with less amp draw and therefore is easier on machinery. ZENESIS™ products are manufactured utilizing the highest standards of manufacturing in ISO certified facilities. This delivers consistent results blade after blade and batch after batch.
  • The ZENESIS™ Black 4 blade is built on high quality, slanted gullet silent cores. Strong cores keep segments cutting true even when mitering, and the slanted gullets draw in more water and push out more swarf/debris resulting in cleaner cuts.
  • Designed to outperform all other bridge saw blade on straight or mitered cuts.
    Application(s)
  • Granite, Engineered Stone, Quartzite
  • + view product list >
    SIZE PART # PRICE
    12 x .125 x 50/60mm S-1213LWZX4-BLK4 call for pricing
    14 x .125 x 50/60mm S-1413LWZX4-BLK4 call for pricing
    16 x .125 x 50/60mm S-1613LWZX4-BLK4 call for pricing
    18 x .125 x 50/60mm S-1814LWZX4-BLK4 call for pricing
    18 x .125 x 50/60mm S-1818LWZX4-BLK4 call for pricing
    20 x .125 x 50/60mm S-2014LWZX4-BLK4 call for pricing
    20 x .125 x 50/60mm S-2018LWZX4-BLK4 call for pricing
ZENESIS™ QUARTZITE
ZENESIS™ QUARTZITE
bridge saw blades
    ZENESIS™ BLADE
  • Quartzite is a unique natural rock made up of interlocking quartz crystals resulting in a remarkably dense and hard rock. A specialized blade is required to quickly and cleanly cut a material of this quality.
    The ZENESIS™ Quartzite blade provides superior cutting performance on quartzite.
  • Unique segment design for fast cutting speeds; has cut Taj Mahal at over 6 ft./min. feed rate
  • Patterned diamond matrix for straight chip-free cuts
  • Soft bond for continuous use without dressing
    Application(s)
  • Granite, Engineered Stone, Quartzite
  • + view product list >
    SIZE PART # PRICE
    12 x .125 x 50/60mm S-1212LWZX4-20Q call for pricing
    14 x .125 x 50/60mm S-1412LWZX4-20Q call for pricing
    16 x .125 x 50/60mm S-1613LWZX4-20Q call for pricing
    18 x .125 x 50/60mm S-1815LWZX4-20Q call for pricing
    20 x .125 x 50/60mm S-2015LWZX4-20Q call for pricing
ZENESIS™ II
ZENESIS™ II
bridge saw blades
    ZENESIS™ BLADE
  • The ZENESIS™ II bridge saw blade revolutionized the stone fabricating industry by raising the bar for cutting speed and blade life. Straight and efficient cutting increases productivity while reducing stress on the bridge saw.
  • 25mm (.984”) segment height
  • Feed rate 10 to 17 feet per minute
    Application(s)
  • Granite, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    12 x .125 x 50/60mm S-1212LWZX4-25C call for pricing
    14 x .125 x 50/60mm S-1412LWZX4-25C call for pricing
    16 x .125 x 50/60mm S-1612LWZX4-25C call for pricing
    18 x .125 x 50/60mm S-1814LWZX4-25C call for pricing
    20 x .125 x 50/60mm S-2014LWZX4-25C call for pricing
ZENESIS™ Carbon
ZENESIS™ CARBON
bridge saw blades
    ZENESIS™ BLADE
  • ZENESIS™ Carbon was originally designed for large format porcelains, but we have later identified an impressive number of additional applications. Not only did this blade outperform the number one recommended blade for Dekton® in an independent side-by-side performance test, but it also worked exceptionally well on difficult semi-precious stones and other challenging materials. It is a highly versatile all-around blade for lower HP (less than 20hp) saws that might otherwise struggle with hard materials. The ultra-thin rim combined with tightly butted segments renders a remarkably clean finish in both straight and miter cuts, and the reinforced core keeps the blade from deflecting while cutting. Combine that with superior manufacturing and highest-grade materials, and you get a blade deserving to be called ZENESIS™!
  • 10mm (.394”) segment height
    Application(s)
  • Dekton®, Neolith®, Lapitech®, Petrified Wood, Slabs made with Geodes
  • + view product list >
    SIZE PART # PRICE
    12 x .125 x 50/60mm S-1210LWZX4-CARB call for pricing
    14 x .125 x 50/60mm S-1410LWZX4-CARB call for pricing
    16 x .125 x 50/60mm S-1613LWZX4-CARB call for pricing
ZENESIS™ Marble
ZENESIS™ MARBLE
bridge saw blades
    ZENESIS™ BLADE
  • ZENESIS™ now offers its exclusive patterned technology in a bridge saw blade designed specifically to cut marble and other soft stone products. As expected, this latest ZENESIS™ Marble blade offers exceptionally smooth, fast and chip-free cutting on all types of marble. This blade is available in diameters of 12” to 20” and is guaranteed to set the standard of performance and meet the demands of marble fabricators everywhere.
  • 10mm (.394”) segment height
  • Designed specifically to cut marble
  • Exceptionally smooth, fast, chip-free cutting
  • Silent core
    Application(s)
  • Marble
  • + view product list >
    SIZE PART # PRICE
    12 x .125 x 50/60mm S-1212LWMSZX4 call for pricing
    14 x .125 x 50/60mm S-1412LWMSZX4 call for pricing
    16 x .125 x 50/60mm S-1612LWMSZX4 call for pricing
    18 x .140 x 50/60mm S-1814LWMSZX4 call for pricing
    20 x .140 x 50/60mm S-2014LWMSZX4 call for pricing
ZENESIS™ Miter
ZENESIS™ MITER
bridge saw blades
    ZENESIS™ BLADE
  • Miter cuts on granite and engineered stone pose particular challenges and require a specialized blade to get the desired results. The ZENESIS™ Miter blade provides sharp, smooth and chip free miter cuts.
  • Strong core to minimize flexing
  • 10mm (.394”) segment height gives good life without worry of segment flexing at the weld.
  • Engineered bond for chip free cuts to leave an invisible seam
    Application(s)
  • Granite, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    14 x .125 x 50/60mm S-1412LWZX4-10MI call for pricing
    16 x .125 x 50/60mm S-1612LWZX4-10MI call for pricing
ZENESIS™ Z-Pattern
ZENESIS™ Z-PATTERN
bridge saw blades
    ZENESIS™ BLADE
  • Equipped with our unique ZENESIS™ pattern diamond technology, the ZENESIS™ Z-Pattern Blade is proven to deliver the fastest and cleanest cut available on the market. This high-performing blade has been expertly developed for wet use only on granite and engineered stone and is proven to perform reliably at feed rates 5-10 feet per minute.
  • Available with unique ZENESIS™ pattern diamond technology
  • 18mm (.708”) segment height
    Application(s)
  • Granite, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    12 x .125 x 50/60mm S-1212LWZX4-ZP call for pricing
    14 x .125 x 50/60mm S-1412LWZX4-ZP call for pricing
    16 x .125 x 50/60mm S-1612LWZX4-ZP call for pricing
    18 x .125 x 50/60mm S-1814LWZX4-ZP call for pricing
    20 x .125 x 50/60mm S-2014LWZX4-ZP call for pricing
X400-20MM
X400-20MM
bridge saw blades
    SUPREME BLADE
  • Pattern diamond technology guarantee maximum performance start to finish
  • 20mm (.787) segment height
  • Silent core for indoor use
  • Proprietary recipe bond that cuts the hardest natural stone, including quartzite, and engineered stone effortlessly
  • Excellent miter cutting blade
  • Slanted gullets draw in more water to keep blade running cooler
    Application(s)
  • Granite, Quartzite, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    12 x .125 x 50/60mm S-1212LWPX4-20 $689.23
    14 x .125 x 50/60mm S-1412LWPX4-20 $777.32
    16 x .125 x 50/60mm S-1612LWPX4-20 $903.54
    18 x .140 x 50/60mm S-1814LWPX4-20 $1,190.49
    20 x .140 x 50/60mm S-2014LWPX4-20 $1,481.99
X400-25mm
X400-25MM
bridge saw blades
    SUPREME BLADE
  • Pattern diamond technology guarantee maximum performance start to finish
  • 25mm (.984”) segment height
  • Silent core for indoor use
  • Proprietary recipe bond that cuts the hardest natural stone and engineered stone effortlessly
    Application(s)
  • Granite, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    12 x .125 x 50/60mm S-1212LWPX4-25 $762.79
    14 x .125 x 50/60mm S-1412LWPX4-25 $884.74
    16 x .125 x 50/60mm S-1612LWPX4-25 $1,063.76
    18 x .140 x 50/60mm S-1814LWPX4-25 $1,385.48
    20 x .140 x 50/60mm S-2014LWPX4-25 $1,689.03
X400-25mm
X400-Q
bridge saw blades
    SUPREME BLADE
  • 20mm (.787”) segment height
  • Quartzite is quickly becoming one of the most popular stones for countertops. It is one of the least popular for fabricators as it can be extremely difficult to cut. It can be simultaneously incredibly hard and very brittle. This blade is specifically designed with a very soft bond matrix to cut very hard materials like any other natural stone.
  • Works very well on granite and engineered stone.
    Application(s)
  • Quartzite, Granite, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    12 x .125 x 60mm S-1212LWX4-20Q $640.83
    14 x .125 x 60mm S-1412LWX4-20Q $767.97
    16 x .134 x 60mm S-1613LWX4-20Q $965.20
    18 x .155 x 60mm S-1815LWX4-20Q $1,211.65
    20 x .155 x 60mm S-2015LWX4-20Q $1,421.79
X300-10MM
X300-10MM
bridge saw blades
    PREMIUM BLADE
  • 10mm (.394") segment height - have less chance of "flexing" while miter cutting
  • Silent core for indoor use
  • Clean Cutting
  • Smaller diamond particulate gives blade perfect chip free cuts in soft materials like marble and limestone
  • Highest diamond concentrate of all our bridge saw blades
    Application(s)
  • Marble
  • + view product list >
    SIZE PART # PRICE
    12 x .125 x 50/60mm S-1212LWMS $543.41
    14 x .125 x 50/60mm S-1412LWMS $642.19
    16 x .125 x 50/60mm S-1612LWMS $740.97
    18 x .120 x 50/60mm S-1812LWMS $1,021.63
    20 x .140 x 50/60mm S-2014LWMS $1,265.58
THIN VENEER
THIN VENEER
large diameter blade
  • The large diameter blades for thin veneer stone from Diamond Vantage are designed to fit the Park Industries Thinstone. TXS Series* thin veneer saws. The tall 20mm segments ensure consistent performance and long blade life, increasing your productivity by reducing machine downtime.
  • Additional sizes/arbors available upon request.
  • Custom Arbor for Park Industries TXS Series*
  • Different bonds available for different types of stone
    Application(s)
  • Thin Veneer
  • + view product list >
    SIZE PART # PRICE
    36 x .250 S-3625XWX4 $3,332.75
    40 x .250 S-4025XWX4 $3,723.20
    48 x .250 S-4825XWX4 $4,422.90
ZENESIS™ TURBO
ZENESIS™ TURBO
turbo rim
    ZENESIS™ BLADE
  • ZENESIS™ announces the third generation wet/dry granite turbo blades. Advancing on the technology that has made ZENESIS™ the best performing bridge saw blades,the new ZENESIS™ Turbo Blades outperform all other blades on the market. The unique turbo design provides fast and clean cuts that are virtually chip free, reducing the clean-up time and therefore not only saving you time when cutting but also afterward.
  • New turbo design for fast clean cuts
  • Cooling holes limit overheating
  • Quad holes for flush cut adapters
  • 5.3” Turbo Plus Blade can cut completely through a 3cm slab
    Application(s)
  • Granite, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    4½ x .080 x ⅞-20mm-⅝ S-4510CDZTB3 call for pricing
    5 x .080 x ⅞-20mm-⅝ S-0510CDZTB3 call for pricing
    5¼ x .080 x ⅞-20mm-⅝ S-05310CDZTB3 call for pricing
    6 x .095 x ⅞-20mm-⅝ S-0610CDZTB3 call for pricing
    7 x .095 x U/A-⅝ S-0710UDZTB3 call for pricing
ZENESIS™ Z-TURBO
ZENESIS™ Z-TURBO
turbo rim
    ZENESIS™ BLADE
  • Delivering fast and clean cuts at an affordable price, the new ZENESIS™ Z-Turbo Blade gives you maximum value. The blade’s narrow turbo design effectively reduces chipping. It comes with flush cut holes and a unique bond that maximizes performance on granite and engineered stone.
  • Narrow turbo design reduces chipping
  • 8mm segment height
    Application(s)
  • Granite, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    4½ x .080 x ⅞-20mm-⅝ S-4508CDZETB2 call for pricing
    5 x .080 x ⅞-20mm-⅝ S-0508CDZETB2 call for pricing
    6 x .095 x ⅞-20mm-⅝ S-0609CDZETB2 call for pricing
    7 x .095 x U/A (DM-5/8) S-0709UDZETB2 call for pricing
X100
X100
turbo rim
    VALUE BLADE
  • 8mm (.315" ) rim height - for longer life
  • 4 countersunk in holes in core to accommodate flush mount adaptors
  • Fast, clean cuts on hard granite and engineered stone
    Application(s)
  • Hard Granite, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    4 x .080 x 7/8-20mm-5/8 S-0408CDZX1-1 $27.81
    4 1/2 x .080 x 7/8-20mm-5/8 S-4508CDZX1-1 $32.03
    5 x .080 x 7/8-20mm-5/8 S-0508CDZX1-1 $34.59
    6 x .095 x 7/8-20mm-5/8 S-0609CDZX1-1 $44.60
    7 x .095 x U/A S-0709UDZX1-1 $55.39
X200
X200
turbo rim
    HEAVY DUTY BLADE
  • 8mm (.315" ) rim height
  • #1 selling blade in stone industry
  • Flush mount adapter ready
  • Great for granite, engineered stone, flagstone, sandstone and brick pavers
    Application(s)
  • Granite, Engineered Stone, Flagstone, Sandstone, Brick Pavers
  • + view product list >
    SIZE PART # PRICE
    4 x .080 x 7/8-20mm-5/8 S-0408CDZX2-1 $31.59
    4. x .080 x 7/8-20mm-5/8 S-4508CDZX2-1 $34.59
    5 x .080 x 7/8-20mm-5/8 S-0508CDZX2-1 $39.50
    6 x .095 x 7/8-20mm-5/8 S-0609CDZX2-1 $48.39
    7 x .095 x U/A S-0709UDZX2-1 $60.30
X400
X400
turbo rim
    SUPREME BLADE
  • 8mm (.315” ) rim height
  • Flush mount adapter ready
  • Designed for the professional who demands the best quality
  • Fast clean cuts in the hardest materials like granite and quartzite
    Application(s)
  • Granite, Quartzite, Other Hard Materials
  • + view product list >
    SIZE PART # PRICE
    4 x .080 x 7/8-20mm-5/8 S-0408CDZX4-1 $69.16
    4 1/2 x .080 x 7/8-20mm-5/8 S-4508CDZX4-1 $70.15
    5 x .080 x 7/8-20mm-5/8 S-0508CDZX4-1 $79.03
    6 x .095 x 7/8-20mm-5/8 S-0609CDZX4-1 $110.65
    7 x .095 x U/A S-0709UDZX4-1 $139.31
X400 Wavy Core
X400 Wavy Core
hard materials
    SUPREME BLADE
  • 9mm (.354”) rim height
  • Turbo rim design with side protection segments to prevent undercutting
  • Best blade for outdoor stones like flagstone, granite and sandstone
    Application(s)
  • Hard Brick/Pavers, Stone (Granite),Hard Materials, Quartzite
  • + view product list >
    SIZE PART # PRICE
    4½ x .080 x ⅞-⅝ 4508CZVX4-1WC $80.20
    5 x .080 x ⅞-⅝ 0508CZVX4-1WC $85.21
    6 x .095 X ⅞-⅝ 0609CZVX4-1WC $110.91
    7 X .095 X U/A 0709UZVX4-1WC $133.38
CONTOUR BLADE
CONTOUR BLADE
segmented
    PREMIUM BLADE
  • Segmented contour blade
  • 6.5mm (.255") segment height
  • Contoured core for making radius cuts and cutting sink openings
  • Unique "T" shaped segments to prevent blade binding while cutting
  • Longest lasting
  • Soft bond for cutting natural stone and concrete
    Application(s)
  • Granite, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    4 x .150 x 7/8-5/8 S-0415CCS $151.18
    4 1/2 x .150 x 7/8-5/8 S-4515CCS $156.07
    5 x .150 x 7/8-5/8 S-0515CCS $167.97
CONTOUR BLADE
CONTOUR BLADE
turbo rim
    PREMIUM BLADE
  • Turbo rim contour blade
  • 6.5mm (.255") segment height
  • Contoured core for making radius cuts and cutting sink openings
  • Turbo style rim for fastest cutting
  • Undercutting segments to prevent binding while cutting
  • Soft bond for cutting natural stone and concrete
    Application(s)
  • All Natural Stone, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    4 x .150 x 7/8-5/8 S-0415CCZ $151.18
    4 1/2 x .150 x 7/8-5/8 S-4515CCZ $156.07
    5 x .150 x 7/8-58 S-0515CCZ $167.97
RODDING BLADE
RODDING BLADE
    PREMIUM BLADE
  • 10mm (.394") segment height
  • Specifically designed for cutting a channel in the underside of countertops
  • 3.3" diameter blade - will guarantee not to blow through the surface of the stone
  • 1/8" thickness for fishtape and fiberglass rodding material
  • 1/4" thickness for thicker rodding material like all-thread
  • Proprietary super soft bond for the hardest materials like granite and quartzite
    Application(s)
  • All Natural Stone, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    3.3 x 1/8 x 7/8-5/8 S-3312CRX4-1  $116.23
    3.3 x 1/4 x 7/8-5/8 S-3325CRX4-1 $168.91
MULTI-GRINDER
MULTI-GRINDER
  • Cut and Grind with one blade
  • With or without flush mount adapter
  • This unique 2-in-1 blade is the ultimate stone installer’s tool
  • Cuts and grinds the hardest materials like granite, engineered stone, flagstone and concrete pavers with ease!
    Application(s)
  • All Natural Stone, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    4 x .100 x ⅞ 0410CZCGX3-2 $123.23
    4½ x .100 x ⅞ 4510CZCGX3-2 $132.85
    5 x .100 x ⅞ 0510CZCGX3-2 $145.75
    6 x .100 x ⅞ 0610CZCGX3-2 $170.35
    7 x .100 x ⅞ 0710CZCGX3-2 $225.03
ELECTROPLATED MULTI-CUTTER
ELECTROPLATED
MULTI-CUTTER
  • Cutting - Continuous Rim blade leaves a beautiful chip-free finish in even the most brittle calcium based stones like limestone, travertine, marble and onyx.
  • Grinding - Supreme quality electroplated diamonds on the face of the blade can sand and grind the material fast without blowouts like you get from traditional diamond cup wheels.
  • Flush Cut Adaptor - The built in adaptor gives you versatility you can’t get with standard diamond blades.
    Application(s)
  • Limestone, Travertine, Marble, Onyx
  • + view product list >
    SIZE PART # PRICE
    4½ x .120 x ⅞-w/ ⅝-11 S-4506CELF $81.62
    5 x .120 x ⅞-w/ ⅝-11 S-0506CELF $87.06
ZENESIS CORE BITS
ZENESIS™ CORE BITS
segmented
    ZENESIS™ BIT
  • ZENESIS™ DRY CORE BIT is thoroughly engineered to achieve superior wet and dry coring of granite and engineered stone. Laser-welded segments, enlarged cooling holes, and generous side coating result in faster cleaner cuts without even breaking a sweat.
  • Available with 5/8-11 threads
  • All-new design for enhanced performance
  • Laser-welded segments for safer coring
  • Larger cooling holes on the barrel
  • Abrasive side coating to reduce friction
  • Designed for granite and engineered stone
  • Can be used wet or dry
  • + view product list >
    SIZE PART # PRICE
    1¼ x .125 x ⅝-11 S-01212HDZX4 call for pricing
    1⅜ x .125 x ⅝-11 S-01312HDZX4 call for pricing
    1½ x .125 x ⅝-11 S-01512HDZX4 call for pricing
    2 x .125 x ⅝-11 S-02012HDZX4 call for pricing
    2¼ x .125 x ⅝-11 S-02212HDZX4 call for pricing
    2½ x .125 x ⅝-11 S-02512HDZX4 call for pricing
    3 x .125 x ⅝-11 S-03012HDZX4 call for pricing
ZENESIS™ Z-CORE BIT
ZENESIS™ Z-CORE BIT
segmented
    ZENESIS™ BIT
  • The all-new ZENESIS™ Z-Core Bit is engineered for optimal performance on granite and engineered stone. It is equipped with abrasive coating both inside and outside to reduce friction and to facilitate easy core removal. Featuring laser-welded segments for safety and long life, this product provides maximum value.
  • Engineering for maximum performance on granite and engineered stone
  • Can be used wet or dry
  • 8mm segment height
  • Approximate 77mm drilling depth
  • + view product list >
    SIZE PART # PRICE
    1 x .125 x ⅝-11 S-01012HDSBSLZX4 call for pricing
    1¼ x .125 x ⅝-11 S-01212HDSBSLZX4 call for pricing
    1⅜ x .125 x ⅝-11 S-01312HDSBSLZX4 call for pricing
    1½ x .125 x ⅝-11 S-01512HDSBSLZX4 call for pricing
    1¾ x .125 x ⅝-11 S-01712HDSBSLZX4 call for pricing
    2 x .125 x ⅝-11 S-02012HDSBSLZX4 call for pricing
RED CORE BITS
RED CORE BITS
segmented
    PREMIUM BIT
  • Available with 5/8-11 threads
  • For drilling of granite and engineered stone
  • Equipped with side plating for added protection (faster drilling)
  • + view product list >
    SIZE PART # PRICE
    1 x .125 x 5/8-11 S-01012HDSBSL $139.33
    11/8 x .125 x 5/8-11 S-01112HDSBSL $144.03
    1 1/4 x .125 x 5/8-11 S-01212HDSBSL $147.81
    1 3/8 x .125 x 5/8-11 S-01312HDSBSL $147.81
    1 1/2 x .125 x 5/8-11 S-01512HDSBSL $156.17
    1 3/4 x .125 x 5/8-11 S-01712HDSBSL $176.80
    2 x .125 x 5/8-11 S-02012HDSBSL $183.32
BLACK CORE BITS
BLACK CORE BITS
segmented
    SUPREME BIT
  • Available with 5/8-11 threads
  • For drilling of granite and engineered stone
  • Equipped with side plating for added protection (longer drilling)
  • + view product list >
    SIZE PART # PRICE
    1 x .125 x 5/8-11 S-01012HDSBSLX4 $139.33
    1 1/4 x .125 x 5/8-11 S-01212HDSBSLX4 $139.44
    1 3/8 x .125 x 5/8-11 S-01312HDSBSLX4 $147.81
    1 1/2 x .125 x 5/8-11 S-01512HDSBSLX4 $156.17
    1 3/4 x .125 x 5/8-11 S-01712HDSBSLX4 $176.80
    2 x .125 x 5/8-11 S-02012HDSBSLX4 $183.32
    2 1/4 x .125 x 5/8-11 S-02212HDSBSLX4 $205.78
    2 1/2 x .125 x 5/8-11 S-02512HDSBSLX4 $229.15
    3 x .125 x 5/8-11 S-03012HDSBSLX4 $247.83
ZENESIS™ Z-THIN WALL CORE BIT
ZENESIS™ Z-THIN WALL CORE BIT
    ZENESIS™ BIT
  • The new ZENESIS™ Z-Thin Wall Core Bit provides excellent performance on all natural and engineered stones. It’s thin wall delivers fast cutting and its clever design minimizes chipping. It is equipped with wrench flats for easy installation.
    Application(s)
  • All Natural Stone, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    S-00712HTWCBZ ¾ x ⅝-11 call for pricing
    S-01012HTWCBZ 1 x ⅝-11 call for pricing
    S-01112HTWCBZ 1⅛ x ⅝-11 call for pricing
    S-01212HTWCBZ 1¼ x ⅝-11 call for pricing
    S-01312HTWCBZ 1⅜ x ⅝-11 call for pricing
    S-01512HTWCBZ 1½ x ⅝-11 call for pricing
    S-01712HTWCBZ 1¾ x ⅝-11 call for pricing
WET THIN WALL CORE BITS
WET THIN WALL CORE BITS (5/8-11)
    PREMIUM BIT
  • 9.5mm (.374") segment height
    Application(s)
  • All Natural Stone
  • + view product list >
    SIZE PART # PRICE
    S-00712HTWCB 3/4 X 5/8-11 Thin Wall Core Bit $113.72
    S-01012HTWCB 1 X 5/8-11 Thin Wall Core Bit $119.88
    S-01112HTWCB 1  1/8 X 5/8-11 Thin Wall Core Bit $123.44
    S-01212HTWCB 1 1/4 X 5/8-11 Thin Wall Core Bit   $127.87
    S-01312HTWCB 1 3/8 X 5/8-11 Thin Wall Core Bit $134.03
    S-01512HTWCB 1 1/2 X 5/8-11 Thin Wall Core Bit $139.32
    S-01712HTWCB 1 3/4 X 5/8-11 Thin Wall Core Bit $154.33
    S-02012HTWCB 2 X 5/8-11 Thin Wall Core Bit $178.09
    S-02312HTWCB 2 3/8 X 5/8-11 Thin Wall Core Bit $190.40
    S-02612HTWCB 2 5/8 X 5/8-11 Thin Wall Core Bit $214.27
    S-03012HTWCB 3 X 5/8-11 Thin Wall Core Bit $235.44
    S-04012HTWCB 4 X 5/8-11 Thin Wall Core Bit $333.29
    S-04712HTWCB 4 3/4 X 5/8-11 Thin Wall Core Bit $396.79
WET THIN WALL CORE BITS
WET THIN WALL CORE BITS (GAS THREAD)
    PREMIUM BIT
  • 9.5mm (.374") segment height
    Application(s)
  • All Natural Stone
  • + view product list >
    SIZE PART # PRICE
    S-01012GTWCB 1 x 1/2 Gas (25mm) STONE CORE BIT $119.88
    S-01212GTWCB 1 1/4 x 1/2 Gas (32mm) STONE CORE BIT $127.87
    S-01312GTWCB 1 3/8 x 1/2 Gas (35mm) STONE CORE BIT $134.03
    S-01512GTWCB 1 1/2 x 1/2 Gas (38mm) STONE CORE BIT $139.32
    S-02012GTWCB 2 x 1/2 Gas (51mm) STONE CORE BIT $178.09
BRAZED CORE BITS
BRAZED CORE BITS
    PREMIUM BIT
  • Good for drilling cast iron and stainless steel sinks
  • Works well wet or dry
  • Approximate 35mm drilling depth
    Application(s)
  • Porcelain Tile, Ceramic Tile, All Natural Stone, Engineered Stone, Stainless Steel Sinks
  • + view product list >
    SIZE PART # PRICE
    5mm, Straight Shank Porcelain Pin Drill, w/ oil 05SPB $68.90
    6mm, Straight Shank Porcelain Pin Drill, w/ oil 06SPB $69.88
    7mm, Straight Shank Porcelain Pin Drill, w/ oil 07SPB $71.28
    8mm, Straight Shank Porcelain Pin Drill, w/ oil 08SPB $72.79
    10mm, Straight Shank Porcelain Pin Drill, w/ oil 10SPB $80.57
    12mm, Straight Shank Porcelain Pin Drill, w/ oil 12SPB $85.43
    15mm, Straight Shank Porcelain Pin Drill, w/ oil 15SPB $94.07
    20mm x 5/8-11, Porcelain Pin Drill, no oil 20HPB $119.34
    25mm x 5/8-11, Porcelain Pin Drill, no oil 25HPB $121.28
    30mm x 5/8-11, Porcelain Pin Drill, no oil 30HPB $131.00
    35mm x 5/8-11, Porcelain Pin Drill, no oil 35HPB $146.45
NON-CORING BITS
NON-CORING BITS
    PREMIUM BIT
  • 7mm (.275") segment height
    Application(s)
  • All Natural Stone
  • + view product list >
    SIZE PART # PRICE
    3/16 x 5/8-11 NCB18 $90.81
    1/4 x 5/8-11 NCB25 $95.34
    3/8 x 5/8-11 NCB37 $98.98
    1/2 x 5/8-11 NCB50 $118.04
ZENESIS™ FINGER BITS
ZENESIS™ FINGER BITS
    ZENESIS™ BIT
  • The all-new ZENESIS™ 4 and 7 segment Finger Bits provide top CNC performance on all stone materials. They deliver precise, quiet and chip-free cutting at faster speeds and can be used on soft to medium-hard materials (4 segments) or medium to hard materials
    (7 segments). The enhanced design utilizes our most advanced diamond pattern to date, which increases durability and prevents premature wear to ensure long tool life.
  • 1/2” gas thread
  • Cuts granite and engineered stone (without the full stop)
  • Recommended RPM ranges from 4,200 in hard material to 5,500 in softer material with a feed rate of 12”~16” per minute
    Application(s)
  • Granite, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    20mm x 1⅝ x ½ Gas, 4 Seg S-02040FBZX4-4 call for pricing
    22mm x 2 x ½ Gas, 4 seg S-02250FBZX4-4 call for pricing
    20mm x 1⅝ x ½ Gas, 7 seg S-02040FBZX4-7 call for pricing
    22mm x 2 x ½ Gas, 7 seg S-02250FBZX4-7 call for pricing
FINGER BITS
FINGER BITS
    PREMIUM BIT
  • 6 segments
    Application(s)
  • All Natural Stone
  • + view product list >
    SIZE PART # PRICE
    22mm OD x 1 5/8 L x 1/2 Gas S-02241NWFB $245.18
    22mm OD x 2 L x 1/2 Gas S-02251NWFB $250.18
    25mm OD x 1 5/8 L x 1/2 Gas S-02541NWFB $245.18
    25mm OD x 2 L x 1/2 Gas S-02551NWFB $272.43
ROUTER BITS
ROUTER BITS
general purpose (wet & dry)
    PREMIUM WHEEL
  • Grinder router bits have a female 5/8" arbor that threads onto any grinder to profile marble, porcelain, block and granite. Each bit has 2 independent steel (not plastic) bearings so they can be run wet or dry. The shaping is done with high quality, large particulate diamonds that are brazed to the body of the bit. Top quality components equal top quality performance!
  • + view product list >
    SIZE PART # PRICE
    3/4 Radius x 5/8-11 S-10H3040RB-B $490.36
    3/8 Radius x 5/8-11 S-20H3040RB-B $635.66
    1” Radius x 5/8-11 S-25H3040RB-B $614.90
    30mm Bullnose x 5/8-11 S-30H3040RB-V $780.95
    1/2 Bevel x 5/8-11 S-15H3040RB-E $531.87
ZENESIS™ PADS
ZENESIS™ PADS
    ZENESIS™
  • ZENESIS™ introduces an unmatched premium
    7-Step Wet Polishing Pad. These new pads achieve the highest gloss readings after the 3000 grit level when polishing both white and black granite. Our unique design provides these pads with an exceptional lifespan.
  • Removes dull spots, etches, and uneven surfaces quickly
  • Shorter polishing times on the most difficult stone surfaces
  • Better shine (higher gloss reading)
    Application(s)
  • All Natural Stone, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    S-4WPPZ-50 4 x ⅝, 50 Grit call for pricing
    S-4WPPZ-100 4 x ⅝, 100 Grit call for pricing
    S-4WPPZ-200 4 x ⅝, 200 Grit call for pricing
    S-4WPPZ-400 4 x ⅝, 400 Grit call for pricing
    S-4WPPZ-800 4 x ⅝, 800 Grit call for pricing
    S-4WPPZ-1500 4 x ⅝, 1500 Grit call for pricing
    S-4WPPZ-3000 4 x ⅝, 3000 Grit call for pricing
STANDARD WET PADS
STANDARD WET PADS
    STANDARD PADS
  • Wet polishing pads, square type
  • This 3mm thick pad is our most popular pad
  • Available in 3, 4 and 5" diameter
  • Excellent for granite, engineered stone and concrete
    Application(s)
  • All Natural Stone
  • + view product list >
    SIZE PART # PRICE
    S-3WPP-50 3 Standard Polishing Pad, 50 Grit $19.01
    S-3WPP-100 3 Standard Polishing Pad, 100 Grit $19.01
    S-3WPP-200 3 Standard Polishing Pad, 200 Grit $19.01
    S-3WPP-400 3 Standard Polishing Pad, 400 Grit $19.01
    S-3WPP-800 3 Standard Polishing Pad, 800 Grit $19.01
    S-3WPP-1500 3 Standard Polishing Pad, 1500 Grit $19.01
    S-3WPP-3000 3 Standard Polishing Pad, 3000 Grit $19.01
    S-4WPP-50 4 Standard Polishing Pad, 50 Grit $25.66
    S-4WPP-100 4 Standard Polishing Pad, 100 Grit $25.66
    S-4WPP-200 4 Standard Polishing Pad, 200 Grit $25.66
    S-4WPP-400 4 Standard Polishing Pad, 400 Grit $25.66
    S-4WPP-800 4 Standard Polishing Pad, 800 Grit $25.66
    S-4WPP-1500 4 Standard Polishing Pad, 1500 Grit $25.66
    S-4WPP-3000 4 Standard Polishing Pad, 3000 Grit $25.66
    S-5WPP-50 5 Standard Polishing Pad, 50 Grit $33.36
    S-5WPP-100 5 Standard Polishing Pad, 100 Grit $33.36
    S-5WPP-200 5 Standard Polishing Pad, 200 Grit $33.36
    S-5WPP-400 5 Standard Polishing Pad, 400 Grit $33.36
    S-5WPP-800 5 Standard Polishing Pad, 800 Grit $33.36
    S-5WPP-1500 5 Standard Polishing Pad, 1500 Grit $33.36
    S-5WPP-3000 5 Standard Polishing Pad, 3000 Grit $33.36
PREMIUM WET PADS
PREMIUM WET PADS
    PREMIUM PADS
  • Wet polishing pads, beehive type
  • Designed for the fabricator who demands the best quality
  • Unique honeycomb segments for the best water displacement while polishing
  • Highest gloss finish
  • 3mm thick pad for long life
  • Available in 4 and 5" diameter
    Application(s)
  • All Natural Stone
  • + view product list >
    SIZE PART # PRICE
    4 x 5/8 S-4WPPX-50 $35.26
    4 x 5/8 S-4WPPX-100 $35.26
    4 x 5/8 S-4WPPX-200 $35.26
    4 x 5/8 S-4WPPX-400 $35.26
    4 x 5/8 S-4WPPX-800 $35.26
    4 x 5/8 S-4WPPX-1500 $35.26
    4 x 5/8 S-4WPPX-3000 $35.26
    5 x 5/8 S-5WPPX-50 $48.49
    5 x 5/8 S-5WPPX-100 $48.49
    5 x 5/8 S-5WPPX-200 $48.49
    5 x 5/8 S-5WPPX-400 $48.49
    5 x 5/8 S-5WPPX-800 $48.49
    5 x 5/8 S-5WPPX-1500 $48.49
    5 x 5/8 S-5WPPX-3000 $48.49
WHITE HYBRID RESIN PADS
WHITE HYBRID RESIN PADS
    PREMIUM PADS
  • These soft resin pads are best for engineered stones with high resin content. No break in required.
  • Gives perfect polish on engineered stone, natural stone and even glass.
  • Hybrid resin works great wet or dry
  • Engineered stone must be run wet to prevent material burn.
    Application(s)
  • All Natural Stone
  • + view product list >
    SIZE PART # Grit PRICE
    4 x 5/8 S-4WPPER-50 50 $20.77
    4 x 5/8 S-4WPPER-100 100 $20.77
    4 x 5/8 S-4WPPER-200 200 $20.77
    4 x 5/8 S-4WPPER-400 400 $20.77
    4 x 5/8 S-4WPPER-800 800 $20.77
    4 x 5/8 S-4WPPER-1500 1500 $20.77
    4 x 5/8 S-4WPPER-3000 3000 $20.77
HEXAGON DRY PADS
HEXAGON DRY PADS
    PREMIUM PADS
  • Dry polishing pads, hexagon type
    Application(s)
  • All Natural Stone
  • + view product list >
    SIZE PART # PRICE
    4 x 5/8 S-4DPPH50 $30.89
    4 x 5/8 S-4DPPH100 $30.89
    4 x 5/8 S-4DPPH200 $30.89
    4 x 5/8 S-4DPPH400 $30.89
    4 x 5/8 S-4DPPH800 $30.89
    4 x 5/8 S-4DPPH1500 $30.89
    4 x 5/8 S-4DPPH3000 $30.89
    5 x 5/8 S-5DPPH50 $52.90
    5 x 5/8 S-5DPPH100 $52.90
    5 x 5/8 S-5DPPH200 $52.90
    5 x 5/8 S-5DPPH400 $52.90
    5 x 5/8 S-5DPPH800 $52.90
    5 x 5/8 S-5DPPH1500 $52.90
    5 x 5/8 S-5DPPH3000 $52.90
ELECTROPLATED PADS
ELECTROPLATED PADS
    PREMIUM PADS
  • Premium grade diamonds electroplated to
    VELCRO® back pad
  • These flexible diamond discs are basically diamond sandpaper. Since they are raw diamond electroplated to foil disc they can be used to shape, sand and hone any natural stone or tile. The larger 7” and 9” discs are popular for sanding interior pool finishes.
  • Great for sanding marble, concrete countertops and swimming pool interiors.
  • Available in 5”, 7” and 9” diameter
  • Grits over 400 available upon request
    Application(s)
  • Marble, Concrete Countertops, Swimming Pool Interiors
  • + view product list >
    SIZE PART # Grit PRICE
    5 S-05BEPSP2-60 60 $70.71
    5 S-05BEPSP2-100 100 $70.71
    5 S-05BEPSP2-150 150 $70.71
    5 S-05BEPSP2-200 200 $70.71
    5 S-05BEPSP2-400 400 $70.71
    5 S-05BEPSP2-600 600 $70.71
    7 S-07BEPSP2-60 60 $168.65
    7 S-07BEPSP2-100 100 $168.65
    7 S-07BEPSP2-150 150 $168.65
    7 S-07BEPSP2-200 200 $168.65
    7 S-07BEPSP2-400 400 $168.65
    7 S-07BEPSP2-600 600 $168.65
    9 S-09BEPSP2-60 60 $285.65
    9 S-09BEPSP2-100 100 $285.65
    9 S-09BEPSP2-150 150 $285.65
    9 S-09BEPSP2-200 200 $285.65
    9 S-09BEPSP2-400 400 $285.65
    9 S-09BEPSP2-600 600 $285.65
RESIN MATRIX PADS
RESIN MATRIX PADS
    PREMIUM PADS
  • These 7” pads are the first resin pad made specifically for the hardscape industry.
  • 3mm thick resin for long life.
  • Premium grade materials for fast removal.
  • Non colored resin leaves no stains or bleeding into plaster.
  • Available in 50, 100 and 200 grit.
    Application(s)
  • Porcelain, All Natural Stone
  • + view product list >
    SIZE PART # Grit PRICE
    7 x ⅝ S-7WRP-50 50 $145.29
    7 x ⅝ S-7WRP-100 100 $145.29
    7 x ⅝ S-7WRP-200 200 $145.29
HYBRID 3 STEP DRY PADS
HYBRID 3 STEP DRY PADS
    PREMIUM PADS
  • Replacing 7-step polishing with only 3 pads
  • #1 pad sand the material, removing saw and grinding marks. Perfect for tumbled travertine.
  • #2 pad hones the material giving it a semi-gloss look and super smooth finish.
  • # 3 pad polishes the material giving it a full gloss shine quickly.
  • Great for backsplashes and sink openings.
  • Amazing for giving porcelain a finished edge detail.
    Application(s)
  • All Natural Stone
  • + view product list >
    SIZE PART # PRICE
    4 x 5/8, Pro1 S-4DP-P1 $21.83
    4 x 5/8, Pro2 S-4DP-P2 $21.83
    4 x 5/8, Pro3 S-4DP-P3 $21.83
    4 x 5/8, Pro1, Pro2, Pro3 Set S-4DP-3STEP $65.49
FLEXIBLE BACKING PADS
FLEXIBLE BACKING PADS
  • For attaching velcro-backed polishing pads
  • 5/8-11 threading
  • Flex type
    Application(s)
  • All Natural Stone
  • + view product list >
    SIZE PART # PRICE
    3 x 5/8-11 S-3BP $22.03
    4 x 5/8-11 S-4BP $29.05
    5 x 5/8-11 S-5BP $35.32
    7 x 5/8-11 S-7BP $115.87
RIGID BACKING PADS
RIGID BACKING PADS
polishing products
    PREMIUM BIT
  • 7mm (.275") segment height
    Application(s)
  • All Natural Stone
  • + view product list >
    SIZE PART # PRICE
    3 x 5/8-11 S-3BPR $31.74
    4 x 5/8-11 S-4BPR $34.39
    5 x 5/8-11 S-5BPR $37.91
6 STEP POLISHING PAD SYSTEM
6 STEP POLISHING
PAD SYSTEM
  • Designed for radius polishing on machines that require 4” snail lock backed tools.
  • Position 1 - Coarse metal bond for shaping material with a Snail lock back.
  • Position 2 - Medium metal bond to prepare material for polishing with a Snail lock back.
  • Position 3 - Coarse resin bond to sand the material with a VELCRO® back.
  • Position 4 - Medium resin bond to hone the material with VELCRO® back.
  • Position 5 - Fine resin bond to polish the material with VELCRO® back.
  • Position 6 - Buff resin bond for darker materials with VELCRO® back.
    Application(s)
  • Radius polishing on All Natural Stone, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    4” x SNAIL LOCK, POS 1 (COARSE) S-4AEGC01 $426.79
    4” x SNAIL LOCK, POS 2 (MEDIUM) S-4AEGM02 $426.79
    4” x VELCRO®, RESIN, 3 S-4AEGR03 $59.02
    4” x VELCRO®, RESIN, 4 S-4AEGR04 $59.02
    4” x VELCRO®, RESIN, 5 S-4AEGR05 $59.02
    4” x VELCRO®, RESIN, 6 S-4AEGR06 $59.02
HYBRID FLAT SNAIL LOCK PADS
HYBRID FLAT
SNAIL LOCK PADS
  • These pads are specifically designed for flat polishing with machines that require 4” snail lock tools.
  • Unique honeycomb design gives perfect water displacement
  • The 50, 100, 200, and 400 grits are made with a hybrid copper bond that gives long life and speed.
  • The 800, 1500, and 3000 leave a mirror finish
    Application(s)
  • Flat polishing on All Natural Stone, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    4 x .315 x SNAIL LOCK S-4WRCS-50 $119.35
    4 x .315 x SNAIL LOCK S-4WRCS-100 $119.35
    4 x .315 x SNAIL LOCK S-4WRCS-200 $119.35
    4 x .315 x SNAIL LOCK S-4WRCS-400 $119.35
    4 x .315 x SNAIL LOCK S-4WRRS-800 $119.35
    4 x .315 x SNAIL LOCK S-4WRRS-1500 $119.35
    4 x .315 x SNAIL LOCK S-4WRRS-3000 $119.35
IN-LINE POLISHING PADS
IN-LINE POLISHING PADS
  • 5” and 6” snail lock backed pads for flat polishing of engineered and natural stone on automated polishing machines.
  • Soft bond requires minimum pressure to achieve perfect shine.
  • White resin will not bleed or stain stone.
  • Polishes all engineered stones in a single pass, light or dark.
  • Unique resin pattern evenly distributes water to prevent burning.
  • Extra thick pad gives very long life.
    Application(s)
  • All Natural Stone, Engineered Stone
  • + view product list >
    SIZE PART # GRIT PRICE
    5 S-5WRPS-50 50 $70.73
    5 S-5WRPS-100 100 $70.73
    5 S-5WRPS-200 200 $70.73
    5 S-5WRPS-400 400 $70.73
    5 S-5WRPS-800 800 $70.73
    5 S-5WRPS-1500 1500 $70.73
    5 S-5WRPS-3000 3000 $70.73
    6 S-6WRPS-50 50 $89.78
    6 S-6WRPS-100 100 $89.78
    6 S-6WRPS-200 200 $89.78
    6 S-6WRPS-400 400 $89.78
    6 S-6WRPS-800 800 $89.78
    6 S-6WRPS-1500 1500 $89.78
    6 S-6WRPS-3000 3000 $89.78
ZENESIS™ RESIN CUP WHEELS
ZENESIS™ RESIN
CUP WHEELS
resin filled
    ZENESIS™ CUP WHEEL
  • Very highest quality diamonds, metals and resin outperforms all competition
  • Unique segment and resin design filled for continuous surface
  • Each cup is precision balanced to eliminate vibration and chipping
  • Available in coarse, medium and fine.
  • Eliminates need for dangerous silicon carbide wheels
  • Best cup wheel for flat grinding
    Application(s)
  • All Natural and Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    4 x ⅝-11, fine 120/140 grit S-04FWRIGGZX4-2 call for pricing
    4 x ⅝-11, medium 80/100 grit S-04MWRIGGZX4-2 call for pricing
    4 x ⅝-11, coarse 50/60 grit S-04CWRIGGZX4-2 call for pricing
BLUE CUP WHEEL
BLUE CUP WHEEL
turbo rim
    PREMIUM CUP WHEEL
  • Special turbo design for a fast and smooth finish
  • Coarse grit for the most aggressive (fastest) grinding
  • Medium grit for a combination of both speed and finish
  • Fine grit for the smoothest finish
    Application(s)
  • Granite and All Natural and Engineer Stone
  • + view product list >
    SIZE PART # PRICE
    4 x 5/8-11, coarse grit S-04HDZGX3-C $145.28
    4 x 5/8-11, fine grit S-04HDZGX3-F $145.28
    4 x 5/8-11, medium grit S-04HDZGX3-M $145.28
    5 x 5/8-11, coarse grit S-05HDZGX3-C $217.92
    5 x 5/8-11, fine grit S-05HDZGX3-F $217.92
    5 x 5/8-11, medium grit S-05HDZGX3-M $217.92
    6 x 5/8-11, coarse grit S-06HDZGX3-C $$258.85
    6 x 5/8-11, fine grit S-06HDZGX3-F $258.85
    6 x 5/8-11, medium grit S-06HDZGX3-M $258.85
    7 x 5/8-11, coarse grit S-07HDZGX3-C $313.25
    7 x 5/8-11, medium grit S-07HDZGX3-M $313.25
ANTIQUING BRUSHES
ANTIQUING BRUSHES
  • Diamond and Nylon wire brushes for creating leather finishes on natural stone.
  • Leathering brushes create a distressed 3 dimensional finish that is becoming more popular every day.
  • The leathering process uses several grits to erode the stone taking down the softer parts and leaving the harder parts higher.
  • As you progress from the coarse brushes to the finer the color and texture get deeper and richer.
  • Highest quality and professional grade.
  • Comes with 5/8-11 and Snail Lock threads.
    Application(s)
  • All Natural Stone
  • + view product list >
    SIZE PART # GRIT PRICE
    4 S-4ABG-24 24 $101.19
    4 S-4ABG-36 36 $101.19
    4 S-4ABG-46 46 $101.19
    4 S-4ABG-60 60 $101.19
    4 S-4ABG-80 80 $101.19
    4 S-4ABG-120 120 $101.19
    4 S-4ABG-180 180 $101.19
    4 S-4ABG-240 240 $101.19
    4 S-4ABG-320 320 $101.19
    4 S-4ABG-400 400 $101.19
    4 S-4ABG-500 500 $101.19
    4 S-4ABG-600 600 $101.19
    4 S-4ABG-800 800 $101.19
    4 S-4ABG-1000 1000 $101.19
    4 S-4ABG-1200 1200 $101.19
    4 S-4ABG-1500 1500 $101.19
    4 S-4ABG-1800 1800 $101.19
    4 S-4ABG-2000 2000 $101.19
ZENESIS™ ZERO TOLERANCE WHEEL
ZENESIS™ ZERO TOLERANCE WHEEL
    ZENESIS™
  • The ZENESIS™ ZERO TOLERANCE WHEELS feature resin-filled metal segments for fast grinding with reduced vibration. Since they use ZENESIS™ pattern technology, the tool life is long and the finish exceptionally smooth.
  • 5/8”-11 thread
  • Grinds granite and engineered stone
  • Can be used wet or dry
    Application(s)
  • Granite, Engineered Stone
  • + view product list >
    SIZE PART # PRICE
    2 x 1⅝ S-2158ZTWZX4 call for pricing
    3 x 1⅝ S-3158ZTWZX4 call for pricing
ZERO TOLERANCE WHEEL
ZERO TOLERANCE WHEEL
    PREMIUM WHEEL
  • Resin filled
  • Designed for grinding on vertical surfaces like sink openings
  • Resin filled segments for smooth finish great on any natural stone, masonry and concrete
  • Available in 2", 3" and 4" diameter.
    Application(s)
  • All Natural Stone
  • + view product list >
    SIZE PART # PRICE
    2 x 1 5/8 L x 5/8-11 Segmented S-02158HZT-S  $236.10
    3 x 1 5/8 L x 5/8-11 Segmented  S-03158HZT-S $286.04
    4 x 1 5/8 L x 5/8-11 Segmented S-04158HZT-S $340.52
    2 x 1 5/8 L x 5/8-11 Resin Filled S-02158HZT-R $281.50
    3 x 1 5/8 L x 5/8-11 Resin Filled S-03158HZT-R  $335.99
    4 x 1 5/8 L x 5/8-11 Resin Filled S-04158HZT-R  $390.47
SHAPING TOOLS
SHAPING TOOLS
    PREMIUM SHAPING TOOL
  • Shank size: 5.95mm diameter, 45mm length
  • Designed to be used where diamond blades and cup wheels can't
  • 1/4" shank to fit any tool with 1/4" collet like die grinders and trim routers
  • Extremely popular with stone sculptors
    Application(s)
  • Different shapes available for natural stones and concrete.
  • + view product list >
    Height Diameter SIZE PART # PRICE
    5mm 25mm FORM 1  S-ST01 $77.20
    5mm 30mm FORM 2  S-ST02 $77.20
    1.9mm 30mm FORM 3  S-ST03 $77.20
    6mm 25mm FORM 4  S-ST04 $77.20
    1.8mm 30mm FORM 5  S-ST05 $77.20
    8.7mm 16mm FORM 6  S-ST06 $77.20
    6.6mm 8mm FORM 7  S-ST07 $77.20
    16mm 8mm FORM 8  S-ST08 $77.20
    16mm 8mm FORM 9  S-ST09 $77.20
    15mm 12.5mm FORM 10  S-ST10 $77.20
    30mm 10mm FORM 11  S-ST11 $77.20
    20mm 12mm FORM 12  S-ST12 $77.20
    12.2mm 13mm FORM 13  S-ST13 $77.20
    17mm 12mm FORM 14  S-ST14 $77.20
    12mm 14mm FORM 15  S-ST15 $77.20